Plate Comparison

Features	CFX	G10	ICE	LUX	Satin
Print Bottom Surface Finish	Smooth, Carbon fiber weave texture	Smooth, Semi-matte	Textured, Glossy	Smooth, Highly reflective	Finely textured, Matte
Application	Ideal for engineering filaments	General usage	High bed adhesion, Room temperature printing	Reflective/smooth bottom surfaces	General usage
Slicer Plate Type	Smooth PEI/High Temp	Black – Smooth PEI/High Temp White – Textured PEI	OrcaSlicer – Textured Cool Plate Bambu Studio – Textured PEI plate (adjust temps)	Smooth PEI/High Temp	Textured PEI
Plate Care	IPA wipedown every print Deep clean (Dawn soap, water, nylon brush, IPA)	IPA wipedown OR Dawn soap, hot water, nylon brush	NO SOAP/IPA Clean with water-dampened washcloth only	IPA wipedown Deep clean (Dawn soap, hot water, nylon brush)	IPA wipedown Deep clean (Dawn soap, hot water, nylon brush)
Notes	PLA/PETG adhesion may require extra care Benefits from heat-soaking, higher bed temps +5 °C	High-temp engineering filaments not supported (PC/PET/PA)	DO NOT PRINT TPU – will irreversibly fuse with plate	High-fill carbon fiber filaments may lightly scratch surface	Z-offset adjustment beneficial for warp-prone materials/complex geometries

Supported Materials

Material	CFX	G10	ICE	LUX	Satin
PLA	✅§	✅	✅	✅	✅
PETG	✅§	✅	✅	✅*	✅†
TPU	✅	✅	❌	✅	✅†
ABS/ASA	✅§	✅	❌	✅†	✅†
Nylon (PA)	✅	❌	❌	✅*	✅†
PC	✅§	❌	❌	✅*	✅*
PET-CF	✅	❌	❌	❌	✅
PPS	✅	❌	❌	❌	❌
Polypropylene	✅§	❌	❌	❌	❌

* Indicates glue/release agent should always be used when printing with this material
† Indicates glue/release agent should be considered when printing with this material
§ Indicates adhesion promoter should be considered when printing with this material