Darkmoon G10 Hobby Build Plate for Bambu Lab Printers
The brand new G10 Hobby build plate for Bambu Lab X1C/P1S/P1P/A1 printers is suitable for all common printing materials, including PLA, PETG, TPU, ABS, and ASA. Keep your prints stuck to the build plate while printing and easily clear them off when it cools.
Supports Bambu Lab X1C build plate detection with included High Temp/Smooth PEI code for easy use.
Reviews
Hear what others are saying!
Ryan
Super Smooth
My PEI plate has been shelved.
Anonymous
Love it
Just works. No glue.
Mark
Great product
Excellent adhesion and smooth result
Recommended Temperatures
The G10 Hobby build plate includes the ArUco code for the Bambu Lab High Temp Plate, which is a good starting point for temperatures to use. However, TPU should be printed at ambient (unheated) temperatures.
Here are the suggested printing temperatures for G10 Hobby plate, which may require some experimentation depending on the specific environment of the printer.
Material types not listed here are not generally recommended.
50-60°C
65-75°C
Ambient temperature
100-110°C
Customer Reviews
Perfect support and a nice plate… my original is collecting dust!
I was happy to get the notification that the G10 Hobby had come back in stock. My Bambu smooth plate took a bit of damage, so this was a welcome addition to the plate family. PLA sticks like crazy, releases easily once cooled as well. I’ve printed 2 TPU prints on it at ambient temp (set Bambu studio to run the plate at 1C so it doesn’t heat anything) and it’s worked beautifully. I will confess that one of the prints had a larger surface area and was a bit difficult to remove, but I succeeded without destroying the print or plate. This is head and shoulders above the Bambu smooth plate. In the pic, you’ll see a 230x230 print of Citizens Bank Park in Philly (Model by Micropolitan over on Thangs). Despite the large area, not even a hint of warping. Love this plate.
Handles pla and petg like a champ with excellent surface finish. Finger oils show up very clearly which makes it easy to know when to clean.
For a similar cost to the bambu lab smooth plate (pre shipping), it's simply better
Great adhesion when hot, pops off easily when cold. Similar to the Bambu PEI plate but with a smooth finish. When I care about the bottom of a print I use this, otherwise the ICE plate. My PEI plate has been shelved.