Darkmoon LUX Bambu Lab Build Plate for X1c and P1S
DarkMoon 3D

Darkmoon LUX Build Plate for Bambu Lab Printers

Sale price$43.99 Regular price$49.99
Save $6.00
4.4

The wait is over! The Darkmoon LUX build plate for Bambu Lab is finally here! Make your prints STUNNING with a highly reflective surface layer on top of exceptional adhesion!

Print all kinds of materials, from PLA and TPU to ABS and PC! Take your print farm to the next level by presenting your customers with high quality, reflective bottom surfaces!

Note: Materials other than PLA and TPU recommend light glue application.

Size: 256 x 256mm (X1/P1/A1)

Reflective Bottom Surface

The best feature of the Darkmoon LUX build plate is the incredible reflective surface that can almost be used as a mirror in good lighting and dark filaments! Check out this comparison between the LUX and the standard smooth PEI plate.

Check out that reflection of the hand in the LUX picture!

Smooth PEI

Darkmoon LUX

Drag

Recommended Settings

Here are some good starting points for various materials. Please note that if you print using a material other than PLA or TPU, glue will likely be required. The glue is used for release from the plate and sometimes for additional adhesion. PVA glue sticks spread with water or IPA are recommended.

PETG always requires glue for release or permanent damage to the build plate can be expected.

Users should assume that glue is required outside of PLA and TPU and may experiment with small prints in far corners of the build plate if they want to see if glue may not be required.

Damage to the build plate can be mitigated by gently roughing the surface with sand paper. Please see the Darkmoon LUX Build Plate User Guide for more information on how to maintain, clean, and service your LUX build plate.

Material

Settings

PLA

Bed Temp: 55-60°C | Glue:No

PETG

Bed Temp: 70-80°C| Glue:Always

TPU

Bed Temp: Ambient| Glue:No

You may also like

Customer Reviews

Based on 7 reviews
86%
(6)
0%
(0)
0%
(0)
0%
(0)
14%
(1)
L
Laurent
No mistakes allowed

First time I use it with PETG. I forgot to put glue. As a result, the plate is destroyed.

i
indoh531
Love it..

New to the sport of 3d printering but the prints come off nice and sexy like.. no problems so far.. gotta love the satin plate as well.. my go to since i recieved it..

M
Matthew N.
Shiny

I haven't used this LUX plate a lot yet - I ordered it with an ICE plate for my A1 mini, and I've mostly been using the ICE plate. Decided to print a tile with this logo on it (D&D logo but with my kids' initials) and I can't believe how smooth and reflective it is. I'm not sure if I'm going to use this LUX plate all the time or save it for special projects, but I know I'm going to have fun with it.

I also want to mention that when I wrote a short (also 5-star) review for my ICE plate, I mentioned something about supports sticking a little too well, and Ben immediately emailed me with advice for getting those supports off smoothly. I'm new to the 3d printing world, but who does that? It's just great all around. All my build plates are going to be Darkmoon from here on out.

User picture
N
Nicholas

Best plate I've owned yet

A
Andrew P.
Amazing!

I have 3 Darkmoon plates now. LUX, ICE, and Satin. I use the Lux for TPU mainly, but its so nice! TPU sticks better than the Bambu smooth plate, and then also comes off so much easier!

12